Cobblestone Millworks

Log Sawing Techniques

Quality comes from the cutting. A log can be sawn in different ways to make the best use of the wood and to obtain the best pieces for a particular purpose. The most common cuts are:

Through and through sawn or slab sawing is sliced from end to end (axis) in line with the grain. This type of cut can produce a few boards near the center of the log that can contain pith. When recut or radial sliced, it can yield two quartersawn boards. Waste is minimized, but boards are prone to warping.

Flat-sawn is a tangential slice from a log mostly tangent to the annual rings. This method avoids including the unstable heart of the tree which is box cut out and discarded. When drying, movement will mostly come from the width of the board which is not desirable.

Traditional quarter sawn material is what we primarily use in the construction of our shutters and blinds. It is a radial slice of a log perpendicular to the face between 60 and 90 degrees.

Quartersawn lumber takes longer to dry than flat sawn. Moisture is released from the edges of the board rather than the face when drying. This type of sawing technique can also be referred to as vertical grain. This cut produces a separate grade that can be sold at a much higher premium and produces boards that are dimensionally stable and less apt to warp or twist when machined.